contador gratuito Skip to content

My iPhone won't turn on: a complete guide

My iPhone won't turn on: a complete guide

People love their iPhones and Apple iPhones are obviously more popular than most other devices due to the high end experience it offers. When your precious product fails to start or turn on, do not try to buy a new one immediately without trying to troubleshoot the device.

This guide was created to help people who like to know how to fix an iPhone that does not turn on. The solutions offered range from very simple ideas to the most complex. Make sure you try them without fail, as your iPhone may work again when you least expect to use a method.

See more- How to fix iPhone / iPad won't download or update apps

Basic troubleshooting strategies

Try to charge your phone

Even if it doesn't seem like the best way to start, it's the first thing to do. Your iPhone's battery could have run out completely, which is why it never turned on. Even if you charged it the day before or a few hours ago, a faulty cable or charger may be the source of the problem. It is a very common mistake that many people make.

Follow the synthesis steps:

  1. Consider charging your phone using a different charger to make sure your device is at fault, not the charger.
  2. Plug in your phone to charge for at least 30 minutes. Sometimes it can even be a battery problem
  3. The charging cable, charger and battery are all here. It's the first step to find out what's wrong

iphone charging

Restart the iPhone and check if it solves the problem

While it may seem very basic and just nonsense to try, just make sure you don't miss the basics, because buying a new iPhone or modifying a component cost more than a few minutes of your time.

See also-What to do if your iPhone has no sound

Here are the steps to follow:

  1. After charging it for a long time and the phone does not turn on, the next step is to try to restart it.
  2. You will find the on / off button on the right side of your iPhone
  3. Hold it for a few seconds and wait for the phone to answer
  4. If it is dyed, it will most likely light up
  5. If it is activated, a cursor will appear allowing you to choose to activate and activate it. This should give you an idea of ​​the current state of your iPhone.

Read more- iPhone vibration problem

Intermediate troubleshooting strategies

Consider a hard reset of your iPhone

All electronic gadgets come with a hard reset button. You may have done this decades ago on your devices by pressing a pin into a small hole and triggering action. Here's how to do it for the iPhone.

  1. For iPhone users using more recent models such as the iPhone 8 or those released later, here's how.
  2. Click once on the volume up button
  3. Click once on the volume down button and quickly release it.
  4. Then click the side button and wait for the hardware reset.
  5. Users still using iPhone 7 or 7 Plus, press and hold the side button for a few seconds 10
  6. Even older models like the iPhone 6 require that you hold down the main button and the side or top buttons for 10-20 seconds to see if the Apple logo appears.
  7. Once the logo appears, release the buttons and see if your iPhone would turn on

iphone restart

Reset iPhone to factory settings

Most users can think twice before restoring their iPhone to factory settings as it will erase all data and reset it to its original state. Even if you haven't backed up recently, you should try this to make sure your device is working or not.

  1. Check if your Mac or computer has detected your iPhone by connecting it with a Lightning cable.
  2. If the icon does not appear in iTunes, it is important to activate recovery mode on your device.

How to activate recovery mode on your iPhone?

  • New owners of iPhone models, including iPhone 8, iPhone X and later, can do this by pressing the volume up button once, the volume down button and holding the side button up '' it lights up in recovery mode.
  • IPhone 7, 7 Plus users should keep the Ct and Volume buttons down at the same time until it enters recovery mode.
  • For iPhone users who always have a Home button on their phone, press the Home button and the top and side buttons simultaneously.

Iphone factory reset

Continue your factory reset on iTunes

  1. Find the iPhone button / icon in your iTunes software
  2. Click on it and find the option that reads 'Restore iPhone'
  3. The option asking if you want to save will appear and you can use it
  4. If that doesn't work, keep cleaning your iPhone and restore it to factory settings.
  5. Let the process finish and check if your iPhone would turn on now if it was blocked by a software problem or even sometimes by a hardware problem
  6. Once it turns on, it is easier to detect if there is a problem with a hardware component by launching a diagnostic.

Expert troubleshooting strategies

Start your iPhone in DFU mode

Despite all the warnings, users sometimes install a new iOS update when the battery life is too low and get stuck in the middle of an OS installation. Some users also find themselves in a situation where they try to jailbreak the iPhone and it does not turn on. For such a scenario, the iPhone, when started in DFU mode, will help.

  1. Leave the iPhone connect iTunes and make sure your device is turned on when you try it.
  2. Press and hold the power button for a few seconds 3
  3. Let it go and keep the volume button down
  4. While holding it, also hold down the power button for a few seconds 10
  5. The same process should be done with the Home and Power buttons for iPhone 6 or older devices.
  6. Release the power button while holding the Volume down / Home button for more than 5 seconds to activate DFU mode

Once this process is successfully completed, the screen will remain black but you will receive instructions on your iTunes which you should follow to recover your iPhone. Some users may expect their iPhone to turn on when in DFU mode, but it doesn't work that way. So, focus on your iTunes and follow the instructions to reset it.

IPhone DFU Mode

Repair a faulty proximity sensor

The advantage of the proximity sensor is that it automatically detects when you keep your iPhone close to your ears to make a call. If there is a problem with the sensor, the screen may remain on continuously and you may not know where the problem is.

  1. To successfully troubleshoot it, you need to hard reset your iPhone.
  2. Instructions on how to do this for different iPhone models have been provided in this article, which you can follow and get.
  3. When your iPhone restarts, it should work and turn on again.
  4. If it works, open Settings on your phone and tap General.
  5. Click Reset, then go to Reset All Settings to delete all of your preferences.
  6. If there is a problem with the screen brightness or automatic deactivation of the configuration, it will erase all of them and solve all existing problems.

Common things to check when your iPhone won't turn on

  1. Always start by checking your iPhone for physical or water damage
  2. Modern phones are more durable, but a fall could affect internal components
  3. Check that the cable is not damaged near the charging port and that no water remains
  4. If you wish to call the warranty, please be aware that AppleCare + is the only way to obtain replacement for water damage, but you will be charged an additional fee.

IPhone Wifi Problems – Read More

Such a problem for the iPhone is quite common and if you are under warranty, you have nothing to fear. The Apple Service Center will take care of the device if no physical damage or water is caused to it. If a hardware component needs to be replaced, it could be very expensive and not the best alternative, especially if your iPhone is an older model.

Knowing how to fix an iPhone that won't turn on is not as complicated as it sounds, as there are only a bunch of suitable solutions you should try. Once all the basic elements are finished and the device still does not work, it is time to consult the service center for a complete disassembly and determine if it is possible to repair it by paying a nominal cost or not . Ultimately, it's about finding what works best for you and choosing the right option.