How to fix iPhone Wi-Fi does not connect

How to fix iPhone Wi-Fi does not connect

If you're having Wi-Fi issues on your iPhone, you're not the only one. Many iPhone owners have complained and continue to complain that their iPhone and iPad do not connect to wifi, for example, being unable to connect to a specific network or network.

Some users connect successfully, but the connection continues to drop. In addition, the connection can be quite slow at times. Here we will list the solutions for all iPhone Wi-Fi Problems, including Gray Wi-Fi and no connection after iOS Update.

See also: How to fix iPhone does not charge

People complained about an unstable Wi-Fi connection or that they were unable to connect to the Wi-Fi network at all. If you've encountered any of these issues, before replacing your router or transferring your Apple Store device As an ultimate solution, there are several things you can try first.

See also: iMessage does not work / waiting for activation iMessage

Solutions for iPhone / iPad Wi-Fi Problems

What are the causes of Wi-Fi problems on iPhone or iPad?

There are many different things that can cause Wi-Fi connection problems. There are simple solutions, such as airplane mode on or your iPhone / iPad being too far from the router. The signal can sometimes be poor, which is why your connection can be slow. A software bug can also be one of the reasons, as well as problems related to network devices (modem and router), or the antenna of the iPhone.

Disable and re-enable Wi-Fi

If your iPhone does not connect to a Wi-Fi network or if it connects but the connection is interrupted, start with a few simple tasks. If you haven't tried it before, turn Wi-Fi off and on again. You can slide your finger from the bottom edge of the screen and open the control center. Tap the Wi-Fi icon to turn it off. Wait a few seconds and press the icon again to turn Wi-Fi back on.

Another way to enable / disable Wi-Fi is to configure the iPhone. Go to Settings> Wi-Fi, and toggle the Wi-Fi side switch.

Disable Bluetooth

Bluetooth may be one of the reasons why your iPhone does not stay connected to a wifi network or does not connect at all, as Bluetooth can cause interference with Wi-Fi connections. This is why you should deactivate it to see if that would make a difference. You can slide your finger from the bottom edge of the screen and tap the Bluetooth icon, or go to Settings> General, then turn it off.

Switch to airplane mode

When we discussed some of the reasons why your iPhone or iPad doesn't connect to Wi-Fi, we mentioned Airplane mode. If this option is enabled, the device will not connect to the network. As soon as you turn it off, the problem will be solved.

Switching the airplane mode can be very effective and help you solve the problem. Go to Settings and activate the airplane mode. Wait 30 seconds and turn it off. Try to connect to a Wi-Fi network again.

Activate Wi-Fi help

If you have installed iOS 9 or later, you are probably familiar with Wi-Fi Support. With this feature, you can still have a stable Internet connection. If your Wi-Fi connection is poor and slow, the Wi-Fi Assistant will automatically switch to the cell phone. Switching Wi-Fi Support has solved Wi-Fi connection issues on the iPhone for many, which is why you should try it. To do this, go to Settings> Cellular, scroll down, activate the functionality and deactivate it.

Toggle Wi-

Restart your iPhone or iPad

A reboot can be a very effective solution if your iPhone / iPad cannot connect to a wifi network or if you have established the connection but it is slow or continues to fall.

  • Press and hold the sleep / wake button
  • Slide "Slide to Dye" to dye your iPhone
  • Once your device is turned on, press and hold the sleep / wake button to wake it up.

www.iphonehacks.com

www.iphonehacks.com

Restart your modem and router

If your iPhone or iPad cannot connect to Wi-Fi at home, but successfully connects to other networks, it is recommended that you restart your modem and router. Unplug them, wait about X seconds, then plug them back in. Wait a minute or two and try to reconnect to Wi-Fi.

youtube.com

youtube.com

We have heard many comments saying My iPhone does not connect to wifi at home, and it connects everywhere else. If you run into the same problem, just restart your network devices and hope everything works fine.

Disable location services for Wi-Fi networking

Many users have said that turning off location services for Wi-Fi networks has solved the problem. Here is what you should do:

  • Go to Settings and press Confidentiality
  • Then tap Location Services
  • Tap System Services
  • Disable Wi-Fi network

Forget the Wi-Fi network

Are you still having problems? Then the next step is to forget about the Wi-Fi network and reconnect. Follow the steps below:

  • Go to settings
  • Tap Wi-Fi
  • Then press the information button (i), located next to the network you want to forget
  • Tap Forget this network
  • Tap Forget to confirm your action.

Once you have forgotten the network, return to Wi-Fi, choose a network and enter the password.

There have been a host of complaints from iPhone owners who have said that iPhone cannot connect to certain Wi-Fi networks or that iPhone 6 cannot connect to the home network. This is how many users have solved the problem.

Update firmware

If your iPhone does not connect to the home Wi-Fi network, maybe updating the firmware of the router will solve the problem. The first thing to do is find the model and version number of your router. You can find this information on the device box or in the manual. In addition, the model and version number are usually located on the router itself, behind or below. Go to the manufacturer's official website and search for the download section. Find your router, then download and install the firmware. If you don't know how to do this, you can find the guide on the manufacturer's website.

source: D-Link

Screen Capture 2016 07-18-9.23.32 PMScreen capture 2016 07-18-9.21.40 PM

Change DNS settings

You can resolve the problem by changing your DNS settings. You can use Google DNS (8.8.8.8 or 8.8.4.4, or both, but make sure you separate them with a comma) or Open DNS (208.67.220.123 or 208.67.222.123). Here's how to do it:

  • Go to Settings and press Wi-Fi
  • Find your network and press the information button (i) just next to the network
  • You will see DNS, press the numbers
  • The keyboard will appear and once it enters the new DNS address.

Reset network settings

If you have tried the solutions mentioned above but your iPhone or iPad does not stay connected to the wifi network or does not connect at all, opting for this option may do the trick. This will reset all of your network connection options – Wi-Fi and cellular settings, saved networks and passwords, as well as VPN and APN settings.

  • Navigate to settings
  • Press General
  • Then press Reset
  • Tap Restore network settings
  • Enter your password if requested
  • Press Reset network settings to confirm your action.

Update software

A software bug can cause all kinds of problems, including various problems related to Wi-Fi. This is why you should make sure that you have installed the latest one. If you haven't, do it now. You can update the software wirelessly, but it can be difficult if your connection is slow or you lose your connection. If your iPhone is unable to connect to the wifi network at all, this option is out of the question, in which case you can update the software using iTunes (following solution, explained below). If you can connect to a specific Wi-Fi network, for example at the office or in a caf, and if the connection is good, proceed as follows:

  • Go to settings
  • Press General
  • Tap Software Update
  • Tap Download and install.

If you've previously downloaded the latest version of iOS and haven't installed it, go to Settings> General> Software Update and tap Install Now.

Update software using iTunes

If you cannot update the software wirelessly, you can do so with iTunes. First, make sure you have the latest version of iTunes installed. Follow these steps:

  • Connect your iPhone to your computer
  • Launch iTunes
  • Select your iPhone
  • Then click on Rsum
  • Click on Check for update
  • If a new version of iOS is available, click Download and install or Update.

Update iOS iTunes

Restore your iPhone to factory settings using iTunes

Most users have been able to solve problems related to Wi-Fi with one of the solutions listed above. However, if you've tried everything and you're still having issues when trying to connect to a Wi-Fi network, it may be time to start fresh. You can restore your iPhone to factory settings using iTunes. Everything you have stored on your device (applications, files and settings that you have adjusted according to your needs) will be erased. Don't forget to save your data!

To restore your iPhone to factory settings:

  • Install the latest version of iTunes software
  • Open iTunes
  • Connect your iPhone to your computer
  • Select your iPhone
  • In the Summary panel, find the option Restore iPhone and click on it.
  • Click Restore to confirm your action
  • Once you do that, iTunes will erase your iPhone and it will install the latest version of iOS software
  • When this is finished, your iPhone will restart
  • Follow the steps on the screen to configure your iPhone as new.

Restore iPhone using iTunes

Renew the lease

With this option, you will get a new IP address from your router and hopefully you will be able to connect to a Wi-Fi network and the connection will no longer be interrupted. To do this, go to Settings> Wi-Fi, find your Wi-Fi network, then press (i) right next to the network. Tap Renew Lease.

Frequently Asked Questions

iPhone WiFi does not light gray

Some users have reported the problem by saying iPhone wifi does not light up gray. If the Wi-Fi is gray, you can perform several operations:

As Ifixit report

Something must be done with Thermal shock.

Advance / Temporary solutions:

Place the phone in the refrigerator for 15 minutes or under a lamp for 30 minutes

To gently heat your iPhone using a hair dryer, over the speaker / front camera, make sure not to damage the screen or the battery, place it a distance of 7-10 of the phone. After detecting a temperature warning, immediately place your iPhone in the freezer for at least 10-20 minutes.

temperature_cool_down "width =" 254 "height =" 451 "srcset =" https://paymonthlylaptops.co.uk/wp-content/uploads/2019/12/1577188657_894_How-to-fix-iPhone-Wi-Fi-does-not-connect.png 640w, https://www.technobezz.com/files/ uploads / 2014/11 / temperature_cool_down-169x300.png 169w, https://www.technobezz.com/files/uploads/2014/11/temperature_cool_down-338x600.png 338w "sizes =" (max-width: 254px) 100vw, 254px "/></p>
<p>Simple solution:</p>
<ul>
<li><span style=Activate / deactivate airplane mode.

  • Restart your iPhone. Press and hold the sleep / wake button, drag the slider, and turn off your phone. Press and hold the sleep / wake button to turn your phone back on.
  • Reset network settings. Go to Settings> General> Reset and tap on Reset network settings.
  • Update the iOS software.
  • Reset all settings. Go to Settings> General> Reset and press Reset all settings.
  • Restore your iPhone to factory settings using iTunes.
  • iPhone does not connect to WiFi incorrect password

    If your iPhone cannot connect to the wifi network with an incorrect password, here are the solutions:

    • If you are connecting to a Wi-Fi network for the first time, make sure you have entered the password correctly.
    • Activate / deactivate airplane mode.
    • Restart your iPhone. Press and hold the sleep / wake button, then drag to dye. Once your device is turned on, press and hold the sleep / wake button to wake it up.
    • Restart your router.
    • Reset network settings. To do this, go to Settings> General> Reset> Reset network settings. Tap Reset network settings.
    • Update iOS.
    • Change the Wi-Fi password.
    • Restore your iPhone to factory settings using iTunes.

    IPhone wifi issues after iOS update

    We always say that it is very important to install the latest version of iOS because it brings bug fixes, increases the security of your device and often introduces new features. However, some problems, including those with Wi-Fi, can occur right after the update. Sometimes all you have to do is wait a while and let your device install after the update, or try the following solutions:

    • Activate Wi-Fi
    • Activate / deactivate airplane mode.
    • turn off the Bluetooth.
    • Forget the network and join it again.
    • Restart your iPhone and your router.
    • Reset network settings. Go to Settings> General> Reset> Reset network settings. Tap Reset network settings.
    • Reset all settings. Go to Settings> General> Reset> Reset all settings.
    • Restore your iPhone to factory settings using iTunes.

    See also: Mac Wifi problems and solutions

    These problems / solutions are found and effective on the iPhone 4, iPhone 4, iPhone 5, iPhone 5, iPhone 5, iPhone 6, iPhone 6 Plus, iPhone 6, iPhone 6, iPhone 7, and iPhone 7 Plus. , iPhone 8 Plus and iPhone X.

    We have listed the different Wi-Fi problem solutions for iPhone, but your device does not connect to a Wi-Fi network, the connection is slow or continues to drop, contact Apple or visit a Genius Bar in one of the Apple stores nearby .